Yes indeed! One of the amazing functions of this camera is the motion detection algorithm designed by us from ground up which is so easy to use. A picture is basically pixels to the camera. We might have a situation where the camera is aimed at an area where trees and bushes are moving in the breeze causing the camera to record as moving pixels are considered motion. However, by remotely opening the camera motion detection tab, users can place the entire live image into a grid as pictured below.
In those areas where motion is unnecessarily causing the camera to record, simply highlight the trees and bushes and remove them from the motion detection zone. Movement in those “selected” areas will NOT trigger motion or record but in other zones not “masked out” within the grid, if motion is detected, yes it will trigger recording. If not sure we will do it for you. By setting the desired motion detection zones, the camera will only concentrate on areas of concern. Algorithms are so advanced they can tell the difference between a shadow and vehicle or a cat and Cat Burglar. Alarm emails alerts are sent to you within seconds (picture attached) and stored on the Cloud so nothing is ever lost.
Time Lapse recording is often preferred on Construction sites. It’s therefore quite easy to set the camera to Time Lapse by day and then after hours (scheduled recording mode) the camera will auto switch to motion detection mode with email alarms if required. In fact our 3G Solar Cam is so advanced it can record time lapse and motion detection simultaneously. Ideal for farmers, water troughs, cattle, gates, builders or any site that needs remote monitoring and scheduled recording.